★★★★★
AC suddenly stopped cooling on a hot afternoon. Called around 3 pm and the technician reached by evening. Found the capacitor was gone, replaced it and showed me the old one too. Back to normal in under an hour.
Doorstep AC service in Narasaraopet
Looking for dependable AC repair and servicing in Narasaraopet? BOBBY provides AC installation, uninstallation, servicing, gas filling and repair, along with home appliance repair services.
Split & window ACs · All major brands · Phone & WhatsApp booking

Customer Reviews
Customer feedback matters to us. Explore experiences shared by customers who have used our AC repair and home appliance services in Narasaraopet and surrounding areas.
Our main focus
AC repair and servicing is what we do best. Every visit starts with a proper inspection, so we fix the real problem instead of guessing.
AC Repair & Troubleshooting
AC Servicing & Maintenance
AC Installation
AC Uninstallation
AC Gas FillingInspection first, gas only when your AC really needs it.
Not every cooling problem needs gas. Dirty filters, a blocked coil or an electrical fault can also cause poor cooling, so our technician inspects the AC first.
AC Deep CleaningBeyond AC
We also repair the appliances your home depends on every day.
Refrigerator Repair
Washing Machine Repair
Air Cooler Repair
Ceiling Fan RepairMulti-brand service
We provide independent repair and servicing support for selected products from popular appliance brands.

BOBBY is an independent service provider and is not an authorised service centre or official partner of these brands. Brand names are shown only to indicate the products we work on. Don't see your brand? Ask us on WhatsApp.

Why BOBBY
We come to your home in Narasaraopet and nearby areas.
AC work is the core of what we do, every single day.
AC, refrigerator, washing machine, air cooler and ceiling fan.
We explain the problem in simple words before starting.
You approve the cost before any repair starts.
Book in a minute with a call or a WhatsApp message.
Simple process
Call or WhatsApp BOBBY and explain your appliance issue.
Share your appliance type, brand and service requirement.
We arrange a visit and inspect the appliance.
You confirm the estimate, we complete the agreed work and test the appliance.
Knowledge Centre
Simple guides to help you understand common problems before you call.
The AC problems we see most in Narasaraopet homes, what usually causes them, what a proper repair involves, and how to get a technician at your doorstep.
Read more: AC Repair in Narasaraopet: Common AC Problems, Repair Solutions & Doorstep ServiceSimple, proven ways to cut AC power use in Indian homes, from the BEE-recommended 24°C setting to filter cleaning and choosing the right tonnage.
Read more: How to Reduce Your AC Electricity Bill in India: 12 Practical Power-Saving TipsA practical, technician's-eye comparison of the main AC brands in India, and the checklist that matters more than the logo: efficiency, service and spare parts.
Read more: Which AC Brand Is Best in India in 2026? LG vs Daikin vs Voltas vs Samsung vs Blue Star & MoreExplore the indoor and outdoor units, discover the components inside them and see how everything works together to cool your room.
Rotate the model, select a component or explore each stage.
Drag to rotate · Pinch or use + / − to zoom
Two units work as one system: the indoor unit cools the room air and the outdoor unit releases the heat outside. Copper pipes, a power cable and a drain pipe connect them.
Hangs on the wall inside the room. It pulls in warm room air, cools it over the evaporator coil and blows it back.
Why it matters It holds the filters, coil, blower and controls — the parts cleaned during routine servicing.
Sits outside. The compressor and condenser release the heat taken out of your room.
Why it matters It needs open space around it so the hot air can escape.
Two insulated copper lines carry refrigerant between the units in a closed loop.
Why it matters Leaks at the joints are the main reason an AC needs gas refilling.
The interconnect cable carries power and control signals between the units.
Why it matters The AC needs a dedicated, properly earthed supply.
Carries the water removed from the air out of the room.
Why it matters It must slope downward all the way, or water drips indoors.
Select a part to see what it does. Layouts differ slightly between brands and models.
Closes the unit over the filters and lifts open for cleaning.
Why it matters Lift it to reach the filters — that is how you clean them at home.
Mesh filters trap dust before it reaches the coil. Clean them every 2–4 weeks.
Why it matters Clogged filters cut airflow and raise power use; cleaning them is the easiest maintenance.
Copper tubes with aluminium fins. Cold refrigerant evaporates inside and absorbs heat from the room air.
Why it matters Dust on the coil reduces cooling and causes bad smells; it is cleaned during AC servicing.
A long tangential wheel that pulls room air through the coil and spreads it evenly.
Why it matters Dust build-up on the blades makes the airflow weak and noisy.
Drives the blower at Low, Medium, High or Auto speed.
Why it matters If the indoor fan does not run, the room will not cool even when the outdoor unit works.
Sits under the coil and collects the water condensed out of humid air.
Why it matters A blocked pan or drain is the usual reason for water dripping from the indoor unit.
Carries the condensate out of the room on a continuous downward slope.
Why it matters A sag or kink in the hose causes water leakage.
Thermistors read the room and coil temperature so the AC knows when to cool, slow down or stop.
Why it matters A faulty sensor can make the AC stop too early or run without stopping.
The indoor brain: reads the remote and sensors, runs the fan, louver and display, and talks to the outdoor unit.
Why it matters Power surges and moisture can damage it; error codes on the display often point here.
Shows the set temperature and mode, and holds the remote's infrared receiver.
Why it matters If the remote stops working, check the batteries and this receiver first.
A small stepper motor swings the louver to aim the cool air up, down or across the room.
Why it matters Aim the louver to spread cool air across the room rather than straight at people.
The rear chassis carries every internal part and hooks onto the wall-mounting plate.
Why it matters It must hang level on the wall plate so water drains correctly.
The outdoor unit holds the compressor and condenser. Layouts differ between brands, and inverter and non-inverter models use different control parts.
Weather-resistant steel base and frame; a partition separates the fan side from the compressor side.
Why it matters Keep it clear of leaves and debris so air can flow freely.
The heart of the system: it compresses refrigerant gas, raising its pressure and temperature.
Why it matters Inverter ACs vary the compressor speed to save power; non-inverter models switch it on and off.
Hot refrigerant releases your room's heat to the outside air here and condenses back to liquid.
Why it matters Dirty fins make the AC work harder; washing them during service improves cooling.
Pulls outside air through the condenser coil to carry the heat away.
Why it matters If this fan stops, the heat cannot leave and the AC cools poorly or trips.
Drives the propeller fan from a bracket in the fan compartment.
Why it matters Worn bearings make a grinding noise — an early sign it needs attention.
Controls the compressor and fan; in inverter models it also varies the compressor speed.
Why it matters Inverter models use an inverter drive board here; non-inverter models use simpler relay controls.
Helps start and run the compressor and fan motors, mainly in non-inverter models.
Why it matters In non-inverter models, a weak capacitor is a common reason the outdoor unit hums but does not start.
Brass valves where the copper pipes connect; used for vacuuming, gas charging and isolation.
Why it matters Gas pressure is checked here, and leaks are often found at the flare joints.
Where the interconnect cable from the indoor unit and the power supply are terminated.
Why it matters Loose or burnt terminals cause tripping; connections must be tight and correctly earthed.
Guards the fan blades while letting air flow freely.
Why it matters Never run the unit without it, and keep fingers and objects away from the fan.
Layouts differ between brands and models; this is a typical split-AC outdoor unit.
A correct installation keeps the AC efficient, quiet and leak-free. These are the key steps a trained technician follows.
Fixed level on a solid wall, with clearance above and at the sides.
Why it matters A crooked plate makes water collect and leak from one side.
A hole of about 65 mm, drilled sloping slightly down to the outside and lined with a sleeve.
Why it matters The outward slope stops water running back into the wall.
Mounted level on rated brackets with room for airflow and service, on anti-vibration pads.
Why it matters Leave space in front of the fan and around the coil for hot air to escape.
Two insulated copper lines — liquid and gas — flared and tightened onto the service valves.
Why it matters Correct flaring and tightening prevent slow gas leaks.
The interconnect cable runs to the outdoor terminal block on a dedicated, properly earthed supply.
Why it matters Use the cable size and breaker rated for your AC.
Routed with a continuous downward slope to a safe drain point, never upward.
Why it matters Pouring water into the tray before finishing confirms it drains properly.
Lines are vacuumed and leak-tested before the valves open; the wall hole is sealed and pipes taped neatly.
Why it matters Removing air and moisture protects the compressor and keeps cooling efficient.
Cooling means moving heat from your room to the outside air. Blue arrows show cool air; orange arrows show heat leaving.
The indoor fan pulls warm air in through the top grille.
Mesh filters trap dust before the air reaches the coil.
Refrigerant inside the coil evaporates and absorbs heat, so the air leaving the coil is cooler and drier.
The cross-flow blower and louver spread cool air evenly across the room.
The compressor draws the refrigerant, now carrying the room's heat, to the outdoor unit and compresses it.
The outdoor fan blows air across the condenser coil and the heat leaves with the warm air. The cooled refrigerant then returns indoors.